繁體中文
中文
English
España
日本語
-
what is the float voltage, how to determine the battery float voltage
The charge voltage of the battery pack must be maintained at a constant value……
-
The newly installed battery, few of them have a large pressure difference phenomenon
After the newly installed battery and floated for a certain period of time, the float voltage will tend to be even, because the newly used battery separator has high sulfuric acid saturation
-
The battery sometimes bulges slightly
Since VRLA uses a tight assembly method and the battery has an internal pressure, the battery case will have a slight degree of bulging on the battery case.
-
After battery discharged, how much time it usually takes to fully charge?
The time required for the fully charged, depends on the discharge capacity and the initial charging current. For example, if a battery is 100% discharged at a rate of 10h
-
What are the types of battery leakage, mainly phenomena
The VRLA battery is a seal battery. If battery leakage, it must be replaced. (1) Phenomenon: A. white crystal around the pole, obviously black corrosion, with sulfuric acid droplets. B. If the battery
-
Why does the battery sometimes fail to discharge when the battery is in use?
(1)The battery is discharged under normal floating condition, and the discharge time is not up to the requirement. The reasons are: (1) If the battery is discharging with a large current, the discharg
点击右上角
分享给朋友吧
Phone：+86-0592-6280077
Address：No.188 Houxiang RD, Xinyang Industrial Zone , Haicang district, Xiamen city , Fujian province , China
COPYRIGHT © 2019 WATA (Xiamen) new energy technology Co., Ltd ALL RIGHTS RESERVED.
